INT-UNC100 ( Universal Network Controller )
The INT-UNC100 series is an access control system welcome addition to the new generation of powerful and reliable Integra hardware. The two door native TCP/IP controller comes equipped with an onboard battery backup charger and a 32-bit processor with encryption. On-board RS-485 channel makes it easy to provide connectivity to other RBH and 3rd party devices, such as: readers, burglar alarm panels, automation systems, etc. The UNC100-132 model comes equipped with IEEE 802.3at compliant PoE capability, further increasing the UNC series’ award-winning efficiency.
Processor / Memory:
32-bit Processor / 2MB
Memory Capacity:
Cards 8,000
Event Log:
3,000
Firmware:
Flash
Communications:
Built in TCP/IP, RS-485
Com Ports:
1 RS-485 programmable
Cable Requirement:
Shielded, twisted pair, 20 – 22 AWG; 4,000 ft (1,200 m) total
Doors / I/O / Other:
2 Doors IN/OUT Mode (RBH-EXITRDR Compatible)
On board Reader Ports:
2 Wiegand ports with up to 5 concurrent card formats
Audio/Visual Controls:
Red and Green reader LED, audible controls
Cable Requirement:
Shielded, stranded 6 or 8 conductor, 20 – 22 AWG; Max 500 ft (150 m) @20 AWG)
Programmable Inputs:
4 + Cabinet Tamper Input
Circuit Types:
4 State Monitoring
Programmable Outputs:
4 (2 relays + 2 voltage outputs)
Relays:
Form C relays, SPDT, 5 A @30 VDC, dry contacts; Fail Safe/Secure programmable
Power:
Current Draw: 1.5 A @ 13.8VDC (backup battery charger requires 13.8 – 15VDC)
Circuit protection: Thermal – Power In, Power Out, Reader Power
PoE (Optional): IEEE 802.3at compliant : 25.5W; Other : 30W
Auxiliary Voltage Outputs: 12-14 VDC @ 500 mA
Dimensions: PCB only 6” H x 5.3” W x 1.5” D
Metal shell: 7.75” H x 5.5” W x 1.5” D
Operating environment Temperature: 0 to 70°C (32 -158°F); Humidity: 20 to 85% RH (non-condensing)
PoE Features
• IEEE 802.3at Compliant
• 30 Watt power rating
• Built-in battery backup with
charger
• Operates with non-compliant
PoE+PSEs
• Available auxiliary power output
