Fire Alarm System

FL-RL-R-S, FL-RL-R-D - Conventional xenon sounder indicator The Xenon sounder indicator is a Fire Alarm, an audible and visual device which requires one single installation point. This greatly reduces installation costs than two separate devices. Versions are available with the sounder and beacon linked, or with separate terminals for independent operation. The weatherproof variant offers an ideal solution for installation in harsher environments, having a IP65 protection rating. Note: From 31st December 2013 a new beacon standard, EN 54-23 became mandatory across Europe where Construction Product Regulation (CPR) applies. If you are in a region where this standard applies please understand that these indicators do not meet the requirements of the new standards Features and benefits • High output sounder beacon • Automatic sounder synchronisation • Up to 103dB(A) with built in Xenon flash • Suitable for a variety of applications • Improved tone clarity, reducing confusion Follow Us on Facebook Contact Us

EFBWCV-REPEATER BiWire and Conventional repeater panel is a Fire Alarm System compatible with our 2 zone, 4 zone and 8 zone BiWire-Ultra (EFBWxZONE), BiWire-Flexi (EFBWxZFLEXI) and the latest release of conventional panels (EFCVxZ). Up to 3 EFBWCV repeater panels can be daisy-chained to a single control panel, allowing all repeater panels to replicate the visual and audible fire and fault information of the control panel. With an integral power supply the only wiring required for the repeater panel is the mains input to the power supply unit and the data cable between the fire control panel and each repeater panel. Features • Can be used with 2, 4 and 8 zone control panels • Internal Power supply • Up to 3 repeaters per control panel • Same modern enclosure as control panels Benefits • One model fits 2, 4 and 8 zone control panel installations • Simple unit cabling • Ability to have several repeaters on same installation • Family [...]

Eaton’s Conventional and BiWire Flexi control panel combines two technologies to provide a truly versatile fire safety solution. The panel can be confi gured to allow either two-wire or conventional devices to work on a zone. Each zone is individually confi gurable so a mixture of types can therefore be installed on the same system. This provides you with the fl exibility to utilise all the time-saving benefi ts of a two-wire system with the ability to use a wide range of conventional devices, where required. Flexi relieves the pressure of system selection. It is the perfect solution for electrical installers and distributors as it takes complexity out of the decision when specifying a fi re system. It can be wired to meet the requirements of a variety of applications and is well suited to extend an existing fi re system. It features a straightforward, intuitive interface, providing a proven solution for simple programming and maintenance. The BiWire Flexi fi [...]

The CF50016 conventional control panel is a 16 zone panel. The panel features an array of user friendly features. The attractive flush or surface mountable plastic enclosure, with metal back box, has been designed through intensive voice of the customer research to provide ample space for termination of cables. The CF50016 comes with a zonal relay card as standard allowing outputs to be switched on a by zone basis. Features and benefits • Zonal relay card as standard • One man test facility • Non latching zone feature • Class change input • Fire and fault relays • Discreet enclosure • Supplied complete with battery for 24 hour standby System functionality 1. Normal and supervisor mode facility. Supervisor mode protected by 4 digit PIN. 2.Supervisor mode provides access to test mode, where a one shot weekly test facility can be initiated by the user. 3.Commissioning walk test feature permits the system to be easily tested after installation and prior to [...]

The FX203 which is a Fire Alarm System a weatherproof version. The FX203 are compatible with the Eaton range of conventional fire systems. These conventional callpoints are attractively designed, simple to install and are supplied as standard with a frangible glass element and a test key for ease of maintenance. A comprehensive range of accessories are available to maximise the functionality of the callpoint for particular applications. Features and benefits • Fast fit clip on front cover • Wide range of accessories • Heavy duty terminals • Two models available: - Internal - Weatherproof • Quick and simple to install • Single tool for test and access • Robust construction • IP65 version available • Easy to maintain/service Installation 1. Surface callpoint has standard rear BESA fixing facilities. In addition, back box can accept top or bottom surface entry cables. 2. Callpoint has test facility via special test key to prevent unauthorised operation. 3. Insertion of test key for test [...]

The Conventional detector range is a Fire Alarm System offers a multi-mode, 5 in 1 detector (FXN922), covering many building needs. It’s quick and simple to install with a stylish low profile design. The detector is mounted on our standard conventional base (EFXN520). Each detector is fitted with a 360˚ viewable LED for indication. This multi-mode detector can be configured to operate as either an optical detector, photo-thermal detector or 1 of 3 heat detector modes (rate of rise and 2 fixed heat models) using the four position switches located at the back of the detector. The FXN922 is certified for use in all 5 modes. We can also supply separate detectors for each individual mode if they are required. These are displayed in the catalogue numbers in the table over the page. Features and benefits • Offers a range of sensor types • 360° visibility LED using lightpipe technology • Drift compensation • Aesthetically pleasing • Quick and simple [...]