RBH-FR-360N Family
RBH-FR-360N Family it’s an Access Control System, utilizing proven digital radio frequency identification (RFID) technology, RBH-FR-360N Proximity Readers deliver the best in class read ranges and reliable operation. Mounting is simplified with vertical and horizontal mounting slots, instead of holes, which allow the reader to be conveniently adjusted and leveled. To allow both indoor and outdoor operation the electronics are sealed in tamper resistant epoxy potting.
Notable features for these are: low power consumption, easy-to-install readers that include Wiegand interface, independently controllable multi-color LED and audio sounder. These readers are also available with additional formats* as well as MIFARE, CSN and MIFARE
Sector:
RBH-FR-360N:
AWID+Keri (Wiegand)- 125 KHz
RBH-FR-360N-H:
AWID and more* – 125KHz
RBH-FR-360N-STO:
MIFARE and more* – 13.56 MHz
Externally controlled
built-in piezo sounder
Compatible with all standard access control systems
• Best-in-class read range*
• FR-360N direct on-metal mounting**
• Mounts onto a single gang electrical switch box
with the optional back plate
• Internal Piezo Sounder
• Tri-color LED standard
• Multiple Weigand formats
• Optional other 125 KHz formats***
• Optional MIFARE compatibility
• Many additional features…
*Read range is stated in a clean RF and electrical environment using
clamshell card presented parallel to reader surface with reader
operating at 12 VDC. Additionally, read range may be affected by local
installation conditions. Range will be less when mounted to metal.
Excludes RBH-FR-360N-STO
Call for a complete list of compatible formats
Reader
RBH-FR-360N RBH-FR-360N-H RBH-FR-360N-STO RBH-FR-360-CSN
Credential Support: AWID HID + AWID RBH Sector Mifare Mifare Card Serial
Number
Frequency: 125 KHz 125 KHz 13.56 MHz 13.56 MHz
Reader Data Formats:
(26 bit – 64 bit) Call for a complete list of compatible formats
MIFARE, DESFire EV1 & more*
Visual Annunciation: Tri-color LED
Audio Annunciation: Built-in piezo sounder
Mounting: Mullon, Directly on metal
Single gang electrical switch box with the optional back plate
Reader: 4.5” x 1.85” x 0.8” (114 x 47 x 20 mm)
Reader with Plate: 5.5” x 3.05” x 0.92” (140 x 78 x 23 mm)
Pig Tail Cable
Length 18”
Operating Temperature: -400 F to +149⁰ F (-40⁰ C to +65⁰ C) / IP-67 Rated
Wiring 500’ (152m) max, 18 – 22 AWG, 6-7 conductor shielded cable
Operating Voltage +5 to 14 VDC
Power Draw: 30 mA typical, 75 mA peak @ 12
VDC 135 mA typical @ 12 VDC
Included in the Box: Reader, plugs, mounting screws, manual
Warranty: Limited 10 year warranty against defects in materials and workmanship
For use with:
• Clam Shell Cards
Up to 6 inches* (152 mm) @ 125 KHz AWID
Up to 1.5 inches* (38 mm) @ 13.56 KHz**
• Printable Cards
Up to 4 inches* (102 mm) @ 125 KHz AWID
Up to 1.5 inches* (38 mm) @ 13.56 KHz**
• Key Fobs
Up to 3 inches* (76 mm) @ 125 KHz AWID
Up to 1.5 inches* (38 mm) @ 13.56 KHz**
• Adhesive Tags
Up to 3 inches* (76 mm) @ 125 KHz AWID
