itshrka

L717 Budget Power Supply Unit is an Intercall Nurse call may be used with smaller Intercall 700 & Intercall 600 systems and the unit provides power and data signals for the network devices and stores the text programming information & when this is customised, it will need to be downloaded to any new display, call logger or pager interface installed on the system at a later date. The L717 is programmed using the LIMK Limkit programming kit and software which plugs into the connector on the right shown below. The system functions are configured using the DIP Switches on the L717. IMPORTANT NOTE: The L617 600 Series Power Supply is still available for maintaining earlier Intercall 600 systems as you cannot replace the L617 with a L717 without ensuring all network devices are 600/700 compatible. Generally speaking, Intercall 600 devices manufactured after 2003/2004 are compatible with the L717. Mains Terminals: 220-240VAC @ 20W (Max) Required Battery: 12v, 1.9/2.1/2.4 Ah sealed [...]

CS1 Ceiling Pull Switch CS1 Ceiling Pull Switch is an  Intercall Nurse call used in bathrooms, fitted to the ceiling over the toilet and bath to allow a call to be generated from these areas. They are fitted with 3 metre length of cord terminated with an easy to operate ‘G’ style pull and twin re-assurance indicators. Size & Weights: Diameter 80mm x depth 30mm weight 50g Important: You must not mix old style Red LED and new style Clear LED Ceiling Pull switches on the same call point. Intercall 600/700 Installation & Operation Guide Issue 4.65 Follow Us on Linkedin Contact Us

L758 Audio Display Unit L758 Audio Display Unit is an  Intercall Nurse call required in every location where calls are to be shown, the alarm is to sound and the intercom facility is required. It features a two line LCD display with back-light, multi-level adjustable alarm, full two-way intercom facility to Audio call points and voice page facility to other displays and call points. It is capable of sounding a different tone for selected call points (doors, drug cupboards, telephone, etc) and only displaying specific call points (Zoning) if required. More information can be found from page 51. There is an open collector output which can be connected to trigger external equipment such as pagers, lamps and sounders. All displays are identical but can be configured on site to operate independently. The unit flush mounts into a standard double gang backbox or may be surface mounted using the Intercall BB1. Network Terminals: Connect to the Intercall 700 (4 wire) Network. [...]

L753 Audio Call Point The L753 Audio Call Point is an Intercall Nurse call required for every individual call location on the system where the two way intercom facility is required. It features seven levels of call, hands free two way intercom, integral infra-red receiver, audio page facility, audible call re-assurance, re-assurance LED and 'call follower' sounder. Emergency call is generated by pressing the Call and Reset Button simultaneously, and the voice intercom facility is only available for Call and Staff Assistance calls. The industry standard trigger socket will accept pear leads, pressure mats, portable radio triggers and a host of other triggering devices. The unit flush and surface mounts into a standard double gang backbox Please refer to the information contained within the installation leaflet for more information regarding installation and performance of the Infra Red receiver. Network Terminals: Connect to the Intercall 700 four wire Network. [A,B,+, -] OBSERVE POLARITY X Terminal: Standard Call Input which automatically generates [...]

RBH-FR-360N Family RBH-FR-360N Family it's an Access Control System, utilizing proven digital radio frequency identification (RFID) technology, RBH-FR-360N Proximity Readers deliver the best in class read ranges and reliable operation. Mounting is simplified with vertical and horizontal mounting slots, instead of holes, which allow the reader to be conveniently adjusted and leveled. To allow both indoor and outdoor operation the electronics are sealed in tamper resistant epoxy potting. Notable features for these are: low power consumption, easy-to-install readers that include Wiegand interface, independently controllable multi-color LED and audio sounder. These readers are also available with additional formats* as well as MIFARE, CSN and MIFARE Sector: RBH-FR-360N: AWID+Keri (Wiegand)- 125 KHz RBH-FR-360N-H: AWID and more* - 125KHz RBH-FR-360N-STO: MIFARE and more* - 13.56 MHz Externally controlled built-in piezo sounder Compatible with all standard access control systems • Best-in-class read range* • FR-360N direct on-metal mounting** • Mounts onto a single gang electrical switch box with the optional back plate • Internal [...]

Prox Reader / Keypad FK-640 it's an Access Control System that utilizing proven digital radio frequency identification (RFID) technology, RBH FK-640 Proximity Reader and Keypad may be mounted directly to standard single-gang US wall-boxes, and is ideal for applications requiring an access credential and/or personal identification number (PIN), such as high security dual verification. Keypad data is transmitted via the reader’s data lines in either an 8-Bit Burst or 26-Bit Wiegand data format. The alpha-numeric keypad itself makes use of a durable (no moving parts), non-mechanical capacitive technology. Enhancements include tactile feedback, and a raised ‘pip’ on the 5-key for use by visually impaired individuals. Mounting is simplified with horizontal and vertical mounting slots, instead of holes, which allow the reader to be conveniently adjusted and leveled. To allow both indoor and outdoor operation the electronics are sealed in tamper resistant epoxy potting. This unit is IP67 Rated Frequency: 125 KHz, Compatible credentials: 125 KHz AWID Reader Data Formats: Wiegand [...]