Access Control System

RBH IRC 2000 UL RBH IRC 2000 UL 2 Door Panel / Software Kit it's an access control system which having Connect via Serial Port, USB or Ethernet, Flash Upgradeable Firmware and 5,000 Cardholders & Access Levels Networks per PC: 32 (RS-232, TCP/IP Ethernet or RS-485, supervised) Controllers per Network: 16 Communication Between Controllers: Supervised RS-485 Speed: Programmable 9.6-56 Kbps Distance: 4,000 ft (1,200m) Cable Type: 18 AWG, 2 conductor, twisted, shielded Cards per Panel: 5,000 (up to ten digit card numbers) 8,000 optional Access Levels per Panel: 5,000 (one per card panel) 8,000 optional Site Codes per Panel: 10 (site code programming is not mandatory) Offline Transactions Buffer: 3,000 FIFO, command and alarm priority Access Points (Readers/Keypads): 2 (Red, Green LED and Buzzer control) Distance: Max 500 ft (150m) Cable Type: 20-22 AWG, 6 or 8 conductor, shielded Simultaneous Card Formats per Panel: 5, Wiegand or Clock & Data Programmable Supervised Inputs: 8, four state monitoring, NO and NC [...]

4 Door Panel Software Kit with Proximity Readers. It's an Access Control System having URC-2000 series High Density Universal Reader Controllers and URC-2008 Elevator Universal Reader Controller IRC-2000 series Integrated Reader Controllers URC-2000 series High Density Universal Reader Controllers URC-2008 Elevator Universal Reader Controller EXITRDR IN/OUT read direction sensing module LIF-200 TCP/IP network gateway H485-USB Protocol converter PC-100 Intrusion alarm panel interface (Contact RBH for compatible intrusion alarm panel models) All readers with Wiegand output (Contact RBH for supported Card Formats) All readers with Clock & Data output (Contact RBH for supported Card Formats) Follow Us on Linkedin Contact Us

Universal Network Controller The RBH-UNC100 series is a welcome addition to the new generation of powerful and reliable Integra32 hardware. The two door native TCP/IP controller comes equipped with an onboard battery backup charger and a 32-bit processor with encryption. On-board RS-485 channel makes it easy to provide connectivity to other RBH and 3rd party devices, such as: readers, burglar alarm panels, automation systems, etc. The UNC100-132 model comes equipped with IEEE 802.3at compliant PoE capability, further increasing the UNC series’ award-winning efficiency. Follow Us on Linkedin Contact Us

LIF-200TCP/IP LAN Gateway is an inexpensive way to connect RBH Access Control panels to a host via the Internet or a local/wide are network. Both RS-485 and RS-232 are supported and are selectable via hardware switch. Reliable, field proven architecture makes for easy configuration and use. Our software communicates directly with LIF-200 gateway, without the need of third party software or “virtual Com ports”. Automatic discovery software is included. Configuration is easily performed via Internet browser. All Connectors are Removable • Screw Down Power Connector • Screw Down RS-485 Connector • Password Protection • Proven IP Protocol Stack • Ethernet RJ45 Connector • Auto Detection 10/100Base-T • Easy to Configure: - Discover Tool - Browser Based Configuration - Backup/Restore Settings - Flash Firmware Upgrades Follow Us on Linkedin Contact Us

Utilizing proven digital radio frequency identification (RFID) technology, RBH-FR-360N Proximity Readers deliver the best in class read ranges and reliable operation. Mounting is simplified with vertical and horizontal mounting slots, instead of holes, which allow the reader to be conveniently adjusted and leveled. To allow both indoor and outdoor operation the electronics are sealed in tamper resistant epoxy potting. Notable features for these are: low power consumption, easy-to-install readers that include Wiegand interface, independently controllable multi-color LED and audio sounder. Follow Us on Linkedin Contact Us

BFR-150x Fingerprint Readers with up to 9500 template capacity; IP65 rated, Built-in RBH 125kHz FR Series Proximity Reader; Selectable Verification Options; Selectable 1: 1 or 1: N Verification Mode The BFR-150 fingerprint reader by RBH is available with a MIFARE smart card reader or 125khz prox reader. Users will benefit from its unparalleled performance, ease-of-use, precision and fast matching speed. This fingerprint reader features a highly accurate optical sensor with tamper switch, advanced matching algorithm and a three color LED indicator for acceptance and rejection of fingerprints Follow Us on Linkedin Contact Us