itshrka

BFR 350 Fingerprint Readers is integrated to all RBH software platforms for easy cardholder enrollment. Reads 13.56mhz mifare CSN or 125khz cards and tags. IP65 rating with 9500 template capacity. Credential, Finger, PIN, Credential + Finger, PIN+Finger, Credential+PIN operating modes Innovative system integrated fingerprint readers by RBH are available with Multi-prox proximity readers. Users will benefit from its unparalleled performance, ease of use, precision and fast matching speed. This Fingerprint reader features a highly accurate optical sensor with automatic finger detection (no need to enter PINs). The user will also benefit from the advanced matching algorithm and audio-visual indications for acceptance & rejection of fingerprints Follow Us on Linkedin Contact Us

Access Cards and Tags RBH-ABA-CS-50 clamshell cards are a more affordable alternative to standard proximity cards. The thicker design makes them ideal for use in active industries. The CR80 proximity card can accept directprint adhesive backed labels for use as a Photo ID card. Price competitive with all other card technologies. Slot punch – vertical orientation. Universal compatibility with all RBH proximity card readers. Laser printed numbers for easy identification and access control. Supports RBH formats with over 100 billion codes. A PVC overlay allows for on-site photo ID using most direct image printers. Thin enough to carry in a wallet or purse. 85.6 x 54 x 1.8mm thick Follow Us on Linkedin Contact Us

Access Cards and Tags RBH-ABA-ISO-50 offers proximity card technology with photo identification capability on a single access control card. It is ISO 7810 compliant, with a nominal thickness of .030”. The card features a graphics quality surface optimized for Photo ID printing, and is available in standard PVC construction for more demanding high wear and tear environments. Universal compatibility with all RBH proximity card readers. Laser printed numbers for easy identification and access control. Supports RBH formats with over 100 billion codes. Compliance: ISO/IEC 7810, ISO/IEC 14443 Slot punch indicators: DOT guides for horizontal and vertical Magnetic stripe ISO card offers both proximity and magnetic stripe identification. Track 1, track 2 or track 3 LOCO, HICO Universal compatibility with all RBH proximity card readers. Laser printed numbers for easy identification and access control. Supports RBH formats with over 100 billion codes. Slot punch indicators: DOT guides for horizontal and vertical   Follow Us on Linkedin Contact Us

sigma mod (907451-907452)For NTP clocks is a clock system having 1 DHF output for radio transmitter and 1 IRIG B/AFNOR coded time output 1 polarised impulse output (24V // min / ½ minute / second, 0.5A), SR2-59 or TBT 24V, - 1 DHF output for radio transmitter - 1 IRIG B/AFNOR coded time output - 1 external contact input, - 3 relays (programmable as D1D2 impulses, alarm or circuits), - 1 Ethernet (RJ45) - NTP protocol Follow Us on Linkedin Contact Us

Sigma H (907411) for impulse clock is a clock system having Automatic resetting of time distribution after power shortage and Automatic summer/winter changeover. Wire or wireless time distribution. • Master clock for synchronisation of a clock network. • Quartz oscillator time base that can be synchronised by an ALS, DCF, GPS, GLONASS or Galileo antenna. • 1 relay for alarm. • 1 D1/D2 output. • Automatic resetting of time distribution after power shortage. • Automatic summer/winter changeover. • Directives : LVD 2014/35/EU, EMC 2014/30/EU. • IRIG.B/AFNOR standard: NFS 87500A. • FI/DCF signal standard: NFC 90002. • AFNOR/DHF standard: NFS 87500C, fixed channel 869,525 MHz at 500mW. Follow Us on Linkedin Contact Us

Sigma P ( 907431) for impulse clock, it's a clock sstem. Wire or wireless time distribution and relay programming, Having Master clock with programmable circuits, control of clock network, relays and bell and Modular design allowing the addition of 2 option cards. Wall-mounted version • Master clock with programmable circuits, control of clock network, relays and bell. • Modular design allowing the addition of 2 option cards. Wall-mounted version • Quartz oscillator time base that can be synchronised by an ALS, DCF, GPS, GLONASS or Galileo antenna. • 3 programming circuits with week mode, holiday or special day mode for the activation of bells and other systems such as heater, air conditioning, lighting, alarms access control, etc. • Automatic resetting of time distribution after power shortage. • Automatic summer/winter changeover. • Programming by PC based software and upload through USB flash drive. COMPLIANCE • Directives : LVD 2014/35/EU, EMC 2014/30/EU. • FI/DCF signal norm: NFC 90002. • IRIG.B / AFNOR [...]