EFDAU500 وحدة مكبر صوت مدمجة (نظام إنذار صوتي) نوع من أجهزة الإنذار المسموعة التي يتم تشغيلها عن طريق لوحة التحكم أو نقطة نداء يدوية

The EFDAU500 wall mounted voice alarm system offers flexibility and optimisation for a range of voice applications, Having Battery space inside enclosure and Built-in fire microphone with front end controls

It is supplied in a compact single cabinet and this all-in-one voice solution includes the following:

• 100 Volt Line / 70 Volt Line selectable transformers
• 3 x 2 ch audio amplifier
• 1 x 2 ch backup amplifier
• AC surveillance continuously or pulse 20 kHz signal with EOL
• Battery charger included for 10-55AH
• Battery space inside enclosure
• Built-in fire microphone with front end controls
• Local Audio Network: 3 x L-NET for remote control devices
• Global Audio Network: 2 x G-NET for ring connectivity of up to 254 nodes

The system can be extended using the HEXAPOD6 (3 per EFDAU500 panel advised)

Features

• EN54-16 certified voice alarm
• Wall mounted
• Amplifier sharing concept
• Up to 254 panels per network
• 600 Watts maximum per EFDAU500 panel

EFDAU500 أجهزة الإنذار المسموعة لوحة التحكم نقطة نداء يدوية وحدة مكبر صوت مدمجة

EF-FMWB – Firefighter’s Microphone

Fireman Microphone in secured wallbox:

• Handheld firemen’s microphone with ALL-CALL button
• Coiled cord working length: 1.10 m
• Fully monitored fault system
• Access level 2 protected wallbox with STANDARD keylock
• Zone selection and busy indicators
• Power, Evac, Fault, Power supply, System fault & Network status indicators
• Lamp test, Silence, Function, Reset, Evac & Alert buttons
• Addressable
• Redundant L-Net link, 2 x RJ45
• 2 x RJ45 for ring, spur or daisy-chain interfacing with the EFDAU500
• Dimensions: 385 H x 440 W x 140 D

EF-FMTC – Firefighter’s / Paging Desktop Microphone

Fireman-Microphone, wall and desktop version:

• Table-top or wall mounted (wall bracket(s) included)
• Handheld firemen’s microphone with ALL-CALL button
• Equipped with EN54-16 mandatory indicators
• Coiled cord working length: 1.10 m
• Fully monitored fault system
• Access level protection by transparent cover
• Addressable
• Redundant L-Net link, 2 x RJ45
• 2 x RJ45 for ring, spur or daisy-chain interfacing with EFDAU500
• Configurable 7” touchscreen for paging control and status information
• 30 cm gooseneck with dynamic hyper-cardioid microphone

EF-HEXAPOD6 – Amplifier Sharing / Multiplexer

Remote Controlled Zone Extender Module for additional 6-sub-zones, dual source path A&B:

• Directly connected to a single/dual output line of the EFDAU500
• The HEXAPOD6 Zone Extender & Switching module sub-divides the signal path A & B into
6 x additional monitored speaker-line outputs
• All HEXAPOD6 -outputs can be individually addressed and are carrying signal path A or B
• Each output can switch to internal 20kHz line surveillance generator (path C)
• Each switched output zone requires an EOL-device for line-integrity detection
• Max. of 3 x HEXAPOD6 sharing 1x L-Net connection for communication and power
(Without additional 24VDC)
• The HEXAPOD6 can be remotely powered in case more than 3 x HEXAPOD units need to be linked to a
single L-Net line
• Max. load: 800 W
• Redundant L-Net link, 2 x RJ45
• Addressable

EF-GPIO-16WAY – Programmable Input/Output module

Remote contact interface with following hardware configuration:

• DIN-RAIL
• 16 programmable monitored inputs
• 16 programmable outputs
• RS485 datalink with 2W DC aux output
• Balanced analogue audio input
• General Fault and EVAC status output
• Redundant L-Net link, 2 x RJ45
• Addressable

EF-FSC-MM – Fiber Optic Interface Module

Fibre-optic interface module, CAT5 to 2 x SC (Multi-mode):

• Connects to ONE RJ45 Global-net port of the EFDAU500
• The EF-FSC-MM is directly powered from the Global-net port
• Requires RX and TX fiber multi-mode connection
• DIN-RAIL mounted
• Redundant L-Net link, 2 x RJ45

EF-EOL-TL – End of Line Module

End Of Line module:

• Selectable load setting
• Thermal fuse
• 2-wire connection (100 mm)
• Protection rating: >IP33