TCP/IP LAN Gateway

Our LIF-200 TCP/IP LAN Gateway is an Access Control System, an inexpensive way to connect RBH Access Control panels to a host via the Internet or a local/wide are network. Both RS-485 and RS-232 are supported and are selectable via hardware switch.

Reliable, field proven architecture makes for easy configuration and use. Our software communicates directly with LIF-200 gateway, without the need of third party software or “virtual Com ports”. Automatic discovery software is included. Configuration is easily performed via Internet browser.

Just configure IP address and port number, type in same settings in the RBH software and you are ready to communicate. LIF-200 automatically detects and adjusts network connection speed. For complex configurations a variety of adjustable settings are available.

Specifications:

Processor / Memory

80186/512K

LAN:

Auto-detection 10/100Base-T (10/100 MBps)

Network Connector:

RJ45 (10/100Base-T) Ethernet

Serial Com. Ports:

1 (RS-232 – RS-485)

Port 1:

Communications (Mounting header)

Signals Used:

RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

RS-485:

DATA+, DATACommunication Speed 50 bps ~ 230 KBps

Compatible Controllers:

RBH-NC-100
RBH-IRC-2000 Series
RBH-URC-2000 Series

Configuration:

Via web browser based interface

MAC based auto discovery utility is included (IPfinder)

Flash ROM Update:

From a TCP/IP host (HTTP)

Dimensions:

Metal housing with 4 mounting holes
Length 99 mm (3 11/16”)
Width 67 mm (2 5/8”)
Height 22 mm (7/8”)

LEDs:

4

Power 1

(Red)

Ethernet Connection

1(Red)

10/1000 MB:

1(Red)

Online:

1 (Green)

Power Requirements:

DC 9V, 300 mA max
DC 12V, 230 mA max
DC 24 V, 160 mA max

Operating Temperature:

0⁰ to 55⁰ C (32⁰ to 131⁰ F)

LIF-200 TCP/IP Access Control System Control panels Internet

Features:

• All Connectors are Removable
• Screw Down Power Connector
• Screw Down RS-485 Connector
• Password Protection
• Proven IP Protocol Stack
• Ethernet RJ45 Connector
• Auto Detection 10/100Base-T
• Easy to Configure:
– Discover Tool
– Browser Based Configuration
– Backup/Restore Settings
– Flash Firmware Upgrades
– Hardware Button Reset

Works With:

RBH Integra Panels

– Connect up to 16 Integra panels to a single LIF-200.
– IRC-2000 Series panels can be connected via RS-232 or
RS485 channels.
– URC-2000 Series panels can be connected via RS485
channel only.

RBH Axiom Panels

– Connect up to 15 Axiom NC-100 Network Controllers to
a single LIF-200.
– NC-100 Network Controllers can be connected via
RS-232 only