![\"Conventional](\"https:\/\/www.kyrcompany.com\/wp-content\/uploads\/2024\/02\/MTech_MB-220_760x560px.png\")
<\/p>\nThe Conventional detector range is a Fire Alarm System offers a multi-mode, 5 in 1 detector (FXN922), covering many building needs. It\u2019s quick and simple to install with a stylish low profile design. The detector is mounted on our standard conventional base (EFXN520). Each detector is fitted with a 360\u02da viewable LED for indication.<\/p>\n
This multi-mode detector can be configured to operate as either an optical detector, photo-thermal detector or 1 of 3 heat detector modes (rate of rise and 2 fixed heat models) using the four position switches located at the back of the detector.<\/p>\n
The FXN922 is certified for use in all 5 modes. We can also supply separate detectors for each individual mode if they are required. These are displayed in the catalogue numbers in the table over the page.<\/p>\n
\u2022 Offers a range of sensor types
\n\u2022 360\u00b0 visibility LED using lightpipe technology
\n\u2022 Drift compensation
\n\u2022 Aesthetically pleasing
\n\u2022 Quick and simple to install
\n\u2022 Wide viewing angle for increased LED visibility
\n\u2022 Positive \u201clock\u201d indication
\n\u2022 Discreet design for incorporation into any decor
\n\u2022 Easy to maintain\/service<\/p>\n
1. Detectors are fixed and wired via common mounting base.
\n2. Cable entry into base can be rear or side.
\n3. A locking facility is provided which can be activated if required to prevent unauthorised detector removal without the use of a special tool.
\n4. Positive click mechanism incorporated to provide clear indication when detector is correctly located in base.<\/p>\n
1. Red LED to indicate alarm condition.
\n2. All wiring connections are via a common mounting base (supplied separately).<\/p>\n