The EFDAU500 wall mounted voice alarm system offers flexibility and optimisation for a range of voice applications, Having Battery space inside enclosure and Built-in fire microphone with front end controls
It is supplied in a compact single cabinet and this all-in-one voice solution includes the following:
• 100 Volt Line / 70 Volt Line selectable transformers
• 3 x 2 ch audio amplifier
• 1 x 2 ch backup amplifier
• AC surveillance continuously or pulse 20 kHz signal with EOL
• Battery charger included for 10-55AH
• Battery space inside enclosure
• Built-in fire microphone with front end controls
• Local Audio Network: 3 x L-NET for remote control devices
• Global Audio Network: 2 x G-NET for ring connectivity of up to 254 nodes
The system can be extended using the HEXAPOD6 (3 per EFDAU500 panel advised)
Features
• EN54-16 certified voice alarm
• Wall mounted
• Amplifier sharing concept
• Up to 254 panels per network
• 600 Watts maximum per EFDAU500 panel
EF-FMWB – Firefighter’s Microphone
Fireman Microphone in secured wallbox:
• Handheld firemen’s microphone with ALL-CALL button
• Coiled cord working length: 1.10 m
• Fully monitored fault system
• Access level 2 protected wallbox with STANDARD keylock
• Zone selection and busy indicators
• Power, Evac, Fault, Power supply, System fault & Network status indicators
• Lamp test, Silence, Function, Reset, Evac & Alert buttons
• Addressable
• Redundant L-Net link, 2 x RJ45
• 2 x RJ45 for ring, spur or daisy-chain interfacing with the EFDAU500
• Dimensions: 385 H x 440 W x 140 D
EF-FMTC – Firefighter’s / Paging Desktop Microphone
Fireman-Microphone, wall and desktop version:
• Table-top or wall mounted (wall bracket(s) included)
• Handheld firemen’s microphone with ALL-CALL button
• Equipped with EN54-16 mandatory indicators
• Coiled cord working length: 1.10 m
• Fully monitored fault system
• Access level protection by transparent cover
• Addressable
• Redundant L-Net link, 2 x RJ45
• 2 x RJ45 for ring, spur or daisy-chain interfacing with EFDAU500
• Configurable 7” touchscreen for paging control and status information
• 30 cm gooseneck with dynamic hyper-cardioid microphone
EF-HEXAPOD6 – Amplifier Sharing / Multiplexer
Remote Controlled Zone Extender Module for additional 6-sub-zones, dual source path A&B:
• Directly connected to a single/dual output line of the EFDAU500
• The HEXAPOD6 Zone Extender & Switching module sub-divides the signal path A & B into
6 x additional monitored speaker-line outputs
• All HEXAPOD6 -outputs can be individually addressed and are carrying signal path A or B
• Each output can switch to internal 20kHz line surveillance generator (path C)
• Each switched output zone requires an EOL-device for line-integrity detection
• Max. of 3 x HEXAPOD6 sharing 1x L-Net connection for communication and power
(Without additional 24VDC)
• The HEXAPOD6 can be remotely powered in case more than 3 x HEXAPOD units need to be linked to a
single L-Net line
• Max. load: 800 W
• Redundant L-Net link, 2 x RJ45
• Addressable
EF-GPIO-16WAY – Programmable Input/Output module
Remote contact interface with following hardware configuration:
• DIN-RAIL
• 16 programmable monitored inputs
• 16 programmable outputs
• RS485 datalink with 2W DC aux output
• Balanced analogue audio input
• General Fault and EVAC status output
• Redundant L-Net link, 2 x RJ45
• Addressable
EF-FSC-MM – Fiber Optic Interface Module
Fibre-optic interface module, CAT5 to 2 x SC (Multi-mode):
• Connects to ONE RJ45 Global-net port of the EFDAU500
• The EF-FSC-MM is directly powered from the Global-net port
• Requires RX and TX fiber multi-mode connection
• DIN-RAIL mounted
• Redundant L-Net link, 2 x RJ45
EF-EOL-TL – End of Line Module
End Of Line module:
• Selectable load setting
• Thermal fuse
• 2-wire connection (100 mm)
• Protection rating: >IP33